Promise Technology VTrak D5000 Series Скачать руководство пользователя страница 35

Страница: 35 / 245

Disk carrier release button

Drive carrier front view

1. Press the drive carrier release button.

2. Grasp the front and gently pull the empty drive carrier out of the enclosure.

3. If you are installing SATA drives, attach a SAS-to-SATA adapter onto the power and IO connectors of each

drive.

4. Carefully lay the drive into the carrier with the power and IO connectors facing away from the carrier

handle.

5. Position the drive in the carrier so the mounting holes line up.

•

2.5-inch drive mounting screws go through the bottom of the carrier.

•

SAS-to-SATA adapter mounting screws go through the bottom of the carrier.

•

3.5-inch drive mounting screws go through the sides of the carrier.

6. Insert the screws through the proper holes in the carrier and into the drive or adapter.

•

Use the screws supplied with the shipment or the SAS-to-SATA adapter.

•

Install four screws per drive.

•

Install two screws per adapter.

•

Snug each screw. Be careful not to over tighten.

With the drive carrier handle in open position, gently slide the drive carrier into the enclosure.

Important

Press the release button to push the drive carrier into position.
Proper drive installation ensures adequate grounding and minimizes

vibration. Always attach the drive to the carrier with four screws.

Promise

Technology

VTrak D5000 Series

Содержание VTrak D5000 Series





















































































































































































































































Результаты поиска

Содержание VTrak D5000 Series

Отзывы:

Бренды по названию

Популярные бренды

Promise Technology VTrak D5000 Series, Руководство по эксплуатации продукта

Результаты поиска

Содержание VTrak D5000 Series

Отзывы:

Бренды по названию

Популярные бренды