Promise Technology VTrak D5000 Series Скачать руководство пользователя страница 206

Страница: 206 / 245

stripe=

Used to specify the stripe size of the logical drive.

The possible parameters are 64KB, 128KB, 256KB, 512KB, and 1MB.

If not specified, the default 64K will be used.

Only valid for add action

sector=

Used to specify the desirable sector size of the logical drive. The possible

parameters are 512B, 1KB, 2KB, and 4KB.

It must not be greater than the Stripe size.

It will be auto-adjusted not to exceed the max supported sector size of the

controller, please see controller information.

If not specified, the default 512 will be used.

Only valid for add action

Axle=

RAID 50, 3 to 32 drives per axle.

RAID 60, 4 to 32 drives per axle.

Valid for add action with physical drive type or expand action on the pool

created by physicsl drive with new drives is physical drive too.

ctrlid=

Used to specify which controller the pool is preferred for LUN affinity. Valid

value is 1 or 2. If value is not specified, LUN affinity will be auto balanced.

Valid for add or mod action.

all pools:

capthreshold=

(75..95 ) Pool capacity nearly full warning threshold.

Valid for add or mod action.

-f

Force delete the pool.

-v

Verbose mode. Used with -a list action.

-y

Enable non-interactive mode.

197

Promise

Technology

Managing with CLI

Содержание VTrak D5000 Series





















































































































































































































































Результаты поиска

Содержание VTrak D5000 Series

Отзывы:

Promise Technology VTrak D5000 Series, Руководство по эксплуатации продукта, Страница: 206 / 245

Результаты поиска

Содержание VTrak D5000 Series

Отзывы: