background image

Pegasus R6, R4 Product Manual

16

Figure 10.Wizard dialog box 

Choose the best method for your situation. See the table below.

Formatting your Logical Drive

A RAID logical drive must also be formatted to be compatible with your computer. 
These instructions describe partitioning and formatting using the Promise Utility 
with default settings.

For additional options, see “Formatting Logical Drives” on page 90.

When you create your logical drives using the Wizard 

Automatic

 or 

Express

 

options, your logical drives are always formatted automatically.

When you create your logical drives using the Wizard 

Advanced

 option, the 

Format option is enabled by default.

When the Promise Utility has finished the partition and format 
operation, new removable-drive icons, each representing one logical 
drive, appear on your desktop (right).

When you see the icon, your logical drive is ready to use.

Method

User Options

Suggested for
users who are

See 

Page

Automatic

None

New to data storage

48

Express

General parameters

Familiar with data storage

49

Advanced

Individual parameters

Data storage professionals

51

Содержание Pegasus R4





















































































































































Отзывы: