Promise Technology Pegasus R4 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 148

background image

Pegasus R6, R4 Product Manual

ii

Copyright

© 2011 PROMISE Technology, Inc. All Rights Reserved. PROMISE, the
PROMISE logo, VTrak, Pegasus, SmartStor, SuperTrak, FastTrak, VessRAID,
Vess, PerfectPATH, PerfectRAID, SATA150, ULTRA133, VTrak S3000,
BackTrak, HyperCache, HyperCache-R, HyperCache-W, DeltaScan and
GreenRAID are registered or pending trademarks of PROMISE Technology, Inc.
in the U.S. and other countries. All other trademarks are the property of their
respective owners. Information regarding products, services and offerings may
be superseded by subsequent documents and are subject to change without
notice. For the latest information and specifications regarding PROMISE
Technology, Inc. and any of its offerings or services, please contact your local
PROMISE office or the corporate headquarters. Visit

www.PROMISE.com

for

more information on PROMISE products.

Important data protection information

You should back up all data before installing any drive controller or storage
peripheral. PROMISE Technology is not responsible for any loss of data resulting
from the use, disuse or misuse of this or any other PROMISE Technology
product.

Notice

Although PROMISE Technology has attempted to ensure the accuracy of the
content of this document; it is possible that this document may contain technical
inaccuracies, typographical, or other errors. PROMISE Technology assumes no
liability for any error in this publication, and for damages, whether direct, indirect,
incidental, consequential or otherwise, that may result from such error, including,
but not limited to loss of data or profits.

PROMISE Technology provides this publication “as is” without warranty of any
kind, either express or implied, including, but not limited to implied warranties of
merchantability or fitness for a particular purpose. The published information in
the manual is subject to change without notice. PROMISE Technology reserves
the right to make changes in the product design, layout, and driver revisions
without notification to its users. This version of this document supersedes all
previous versions.

Recommendations

In this

Product Manual

, the appearance of products made by other companies,

including but not limited to software, servers, and disk drives, is for the purpose of
illustration and explanation only. PROMISE Technology does not recommend,
endorse, prefer, or support any product made by another manufacturer.

«
1
2
3
4
...
»

Содержание Pegasus R4





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Pegasus R4

ShareCenter DNS-320L

Бренд: D-Link Страницы: 4

Бренд: Patton electronics Страницы: 51

Бренд: SAF Страницы: 30

Бренд: Edge-Core Страницы: 7

Бренд: CAP-XX Страницы: 8

Бренд: Wintech Страницы: 21

Бренд: XtendLan Страницы: 228

Бренд: WAGO Страницы: 48

Elite Controller

Бренд: RANA Systems Страницы: 328

Oresund EFC102200

Бренд: Bridgeworks Страницы: 84

DataPlot CB1224

Бренд: B-G Instruments Страницы: 4

Бренд: Promise Technology Страницы: 26

Бренд: IBM Страницы: 72

Бренд: Xilinx Страницы: 29

Бренд: Air Live Страницы: 2

Бренд: Ciara Страницы: 14

Soundweb 9088ii DSP System

Бренд: BSS Audio Страницы: 2

Safeguard for Privileged Sessions 3000

Бренд: One Identity Страницы: 37

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды