53
Chapter 4: Using ConnectStor II
Once you have successfully completed the ConnectStor II installation and configuration, the
network attached storage system is now available to your network users. Individual users will
first want to "map" their network PCs to the ConnectStor II unit in order to begin saving and
retrieving data. Next, users may wish to create common folders within the ConnectStor II
storage array.
Mapping ConnectStor II to Individual PCs
To begin using the ConnectStor II unit for network storage, each user must first map the
ConnectStor II unit to their computer. If the user has full read/write/change rights, he/she can
then create sub-folders or directories within all areas of ConnectStor II for which the user has
access.
These directions for mapping ConnectStor II will work with the following network
installations (contact your network administrator if you have any questions):
• Microsoft network using TCP/IP
• Microsoft network using NETBEUI (
with TCP/IP also configured
)
• NFS - Configure the UNIX/Linux Network Setup
Windows XP
1.
Be sure that there is a folder on ConnectStor II for each user planning to map
ConnectStor II to his/her PC, and that the user has access rights to the folder (see page
3
6
).
2.
In Windows, click the Start button, click
Search
and then click
Printers, computers, or
people
in the
dialog box (below, left). Click on
A computer on the network
(below,
right)
3.
Type the ConnectStor II’s Server Name (see page 19) in the
Computer name:
field,
then click the
Search
button.
Содержание ConnectStor II
