Chapter 3: Configuration
49
Halt / Reboot ConnectStor II
The user/supervisor may need to take ConnectStor II offline temporarily in the case of
removing/replacing hard drives or simply reboot the unit due to certain other network issues.
Clicking on the
Halt/Reboot
command from the Configuration side menu will display two
buttons: Halt ConnectStor II or Reboot ConnectStor II as seen below:
Halting ConnectStor II
1.
Clicking the
Halt ConnectStor II
button will shut down the unit remotely. A
confirmation window will appear.
2.
Click
OK
to confirm. A second confirmation window will appear.
3.
Click
OK
to confirm. The browser will ask permission to close the window.
4.
Close your browser window.
NOTE
: To restart the ConnectStor II, turn the power switch off
and then on again.
Remotely Rebooting ConnectStor II
1.
Clicking the
Reboot
button reboots the ConnectStor II operating system.
2.
Click
OK
to confirm. A second confirmation window will appear.
3.
Click
OK
to confirm. The browser will ask permission to close the window.
4.
Close your browser window.
5.
In your browser, reconnect to the ConnectStor II and login.
CAUTION
: Users temporarily will be unable to access the unit's
data until the system reboots completely.
Содержание ConnectStor II
