Chapter 3: Configuration
47
Changing RAID Level
During setup, if you installed only one hard drive, ConnectStor II formatted it as a single-disk
RAID 0 striped array. If you installed two hard drives, ConnectStor II formatted them as a
two-disk RAID 1 mirrored array.
You may convert two-disk array from RAID 1 to RAID 0 and vice versa.
WARNING:
Changing RAID configuration at any time will
DELETE all data stored on the ConnectStor II unit. Make sure
you backup all folders and data PRIOR to changing this
setting.
1.
To change RAID level, select
Setup
from the side menu. The following screen will
appear:
2.
If you are going from a RAID 0 to a RAID 1, select ON or OFF for Gigabyte Boundary.
See the discussion on the next page.
3.
Click on the
Change RAID Level
button. A confirmation window will appear.
4.
Click OK to confirm. A confirmation window will appear.
5.
Click OK to confirm. The browser will ask permission to close the window.
6.
Close your browser window.
7.
In your browser, reconnect to the ConnectStor II and log in.
ConnectStor II will reboot, and then automatically reconfigure and reformat the drives to
reflect the new RAID level (see below).
Содержание ConnectStor II
