ConnectStor II User Manual
26
Changing IP Address Assignment Mode
Each device on the network must have a unique IP address in order to be accessed and seen
by network users. If you have run the IPassign utility (see page 12), you have already found
at least one unique IP address for your network. It is possible to keep that address or to assign
new addresses each time ConnectStor II is booted up.
To change the way that ConnectStor II is assigned an IP address, choose
IP Assignment
from
the Configuration System submenu. The following screen will appear:
Setting Dynamic IP Address Assignment
By default, ConnectStor II works with a DHCP (Dynamic Host Configuration Protocol)
server that assigns a unique IP (Internet Protocol) address for ConnectStor II each time
the unit is booted or requires use of the IPassign program.
1.
Make sure the
Dynamic IP Address
radio button is highlighted to Enable this
option.
2.
Click
Submit
button. Confirmation window will appear.
3.
Click
OK
to confirm.
Setting Static IP Address Assignment
To have ConnectStor II use one specific IP address, select the
Static IP address
radio
button. Be sure all Network IP settings are correct (see page 19). If you are unsure, select
Dynamic IP Address
. Refer to the Troubleshooting section (see page 6
9
) if you cannot
change the IP address.
Содержание ConnectStor II
