ConnectStor II User Manual
12
Connect the Power Cord
Connect one end of the power cord to the AC Power connector located on the back of the
ConnectStor II unit. Connect the other end of the power cable to a power source or
uninterruptible power supply.
NOTE
: The ConnectStor II unit automatically recognizes and
switches to proper 110V or 220V settings.
Power Switch
Switch on the power to the ConnectStor II unit.
Assigning a Static IP Address
If your network has a DHCP (Dynamic Host Configuration Protocol) server, it will
automatically assign a dynamic IP address to your ConnectStor II. Proceed to
Chapter 3.
If your network does NOT automatically assign IP addresses to newly-attached network-
ready devices using a DHCP server, you MUST perform the following steps in order to
manually assign a unique, static IP address from a Windows-based PC:
1.
Insert the CD to your CD-ROM drive.
2.
Double-click the CD-ROM button.
3.
Open the directory and execute the program: IPassign version 3.0.0.1.
The IPassign dialog box displays all ConnectStor II units it finds on the network
(below).
4. Click
the
No IP
entry, then click the Search button. The dialog box will show as
below.
Содержание ConnectStor II
