Printware iJet Press, Руководство оператора

Страница: 27 / 88

SECTION 2
INSTALLING THE PRINTER
21
6. Prepare the printhead cartridge.
Carefully remove the Printhead Cartridge from the foil
vacuum packaging
. Tear at notch or cut end with scissors.
CAUTION: DO NOT touch the ink couplings, printhead
nozzle surface or electrical contacts.
[A] Remove the protective plastic cover. Hold the
Printhead cartridge by the handle.
Unclip the ink port covers [1, 2], then unclip the cover from
the center point of the cartridge [3].
Grasp the protective cover firmly, then rotate the top of the
cartridge away from the ink port side of the cover and lift at
the same time.
Save this protective cover for future use.
CAUTION:
DO NOT touch the ink couplings, printhead
nozzle surface or electrical contacts.
[B] Remove protective strip from the Printhead
Electrical Contacts
.
Dispose of the removed strip immediately.
CAUTION: DO NOT allow removed strip to touch the
electrical contacts. DO NOT try to re-apply the removed
strip.
[C] Remove protective strip from the Printhead Nozzles.
Hold the Printhead by the handle with one hand. With the
other hand; grasp the strip tab and slowly peel the strip, at an
angle (90° to 45°), from the printhead nozzles.
DO NOT pull the strip off at an angle less than 45° with the
printhead surface.
Dispose of the removed strip immediately.
CAUTION:
DO NOT allow removed strip to touch the
electrical contacts or printhead nozzles. DO NOT try to re-
apply the removed strip.
NOTE: Keep packaging to store/dispose of printhead
cartridge.