SECTION 4
MAINTENANCE
48
Cleaning the Service Station
Caution:
Please be sure to that you are using proper cleaning techniques to clean items that come in
contact with the printhead. Use only distilled or deionized water and lint free cloth. If you don’t follow this
rule, you will introduce contamination into the printhead; which can damage the printhead and ink system.
Service Station Tray
1.
Remove the Wiper Roller, Printing Station and Capping Station.
2.
Wipe the Tray with a damp, cloth to remove the major ink buildup.
3.
Then rinse using tap water.
Caution:
Be careful not to get the printed circuit board or connections wet. If you want to avoid
this possibility the board should be removed from the tray before you begin the cleaning process.
Wiper Roller Removal and Cleaning
1.
Lift up the Wiper Roller Assembly.
2.
Carefully loosen the two small screws retaining the Wiper Roller Latches.
DO NOT remove the screws all the way.
3.
Release the two latches that secure the roller.
4.
Remove the roller.
5.
Cleaning:
Using distilled water; immerse for 10 minutes, then remove
and pat dry with absorbent lint free towel. Do not rub the roller or this
will cause damage to the roller.
NOTE
: If the Wiper Roller is un-even or fuzzy, it should be replaced.
6.
Re-install the roller.
Make sure the gear on the Roller engages the gear in the Service Station
Tray. Carefully close the latches.
NOTE:
Make sure latches are fully locked and the screws are tightened.
Printing Platen and Capping Station Removal and Cleaning
1.
Both simply lift out for removal from the Service Station.
2.
Clean off ink major buildup with tap water.
3.
Wipe the capping lip with a lint free cloth dampened with distilled water. This will help insure that
the contaminants on the cap are removed, before the cap makes contact with the printhead.
4.
Reinstall Capping Station into Service Station Tray.
Wiper Motor Assembly.
See
"Removing the Wiper Motor Assembly and Cleaning the Wiper Motor Assembly"
on the
next page.
Содержание iJet Press
Страница 1: ...Digital Color Printer OPERATOR S GUIDE ...
Страница 6: ......
