Printware iJet Press, Руководство оператора

Страница: 51 / 88

SECTION 4
MAINTENANCE
45
Cleaning the Lip of the Printhead Cap
The Printhead Cap is part of the Service Station. When the printer is idle, the Service Station automatically
caps the printhead to keep the nozzles hydrated.
Excess ink can accumulate on the Lip of the Printhead Cap. This commonly occurs after a printhead
cartridge is installed and they system is primed. During the printhead priming process the system performs
multiple purges of ink into the cap. This can cause excess ink to build on the lip of the cap. This excess ink
will then be transferred to the printhead surface, when the printhead is capped.
Procedure:
1. Power-down the printer using the ON/OFF button.
2. After the Control Panel Lights have all turn OFF; Open the Top Cover.
3. Carefully release the Latches and Open the
Clamshell.
4. Using a lint free cloth; carefully wipe the excess ink from the Lip of the Capping Station.
5. Carefully close the Clamshell.
Important! Make sure to hold the latches open (unlocked position) until the clamshell is closed.
Then slowly release the latches. If this rule is not followed damage to the latch posts and or door
switch may result.
6. Close the Top Cover.
7. Power-On the printer.
Lip of Printhead Cap