Printware iJet Press, Руководство оператора

Страница: 12 / 88

SECTION 2
INSTALLING THE PRINTER
6
Section 2 – Installing the Printer
Before using the Digital Color Printer the following must be done:

Upon delivery; inspect packaging and report any issues to Carrier.

Choose a location for the printer

Unpack and assemble the printer

Install the Printer Software (Drivers and Toolbox)

Install the Ink Tanks

Install the Printhead

Set up the feed on the printer to accommodate your media (covered in Operating the Printer ).
Transport Inspection
The printer is shipped in appropriate packaging so that, under normal shipping conditions, it reaches its
destination without damage.
NOTICE: Report damage to the carrier. The carrier is liable for any damage during transport.
Transport and storage should take place under the following conditions:
- At temperatures between -25°C and +50°C (-13 °F to 122 °F).
- At a relative air humidity between 5% and 95%, non-condensing.
- At an atmospheric pressure between 70 kPa and 105 kPa.
Exposure to conditions that are not permissible may lead to damage which is not externally visible.
IMPORTANT Please save the packaging materials for future use! It will be required if you ever need to
ship the printer. Before shipping; please refer to the appendix section “ Preparing the Printer for Transport
”.
Tools Needed

Knife and scissors to open packaging

#2 Philips head Screwdriver

Carpenters Level (recommend using 18” or longer level)

Protective gloves should be worn to avoid getting ink on hands when removing protective
packaging materials from the ink coupling areas, the Ink Tank areas, and when
installing/removing Printhead Cartridge and Ink Tanks.