Primera LP130e, Руководство пользователя

Страница: 29 / 50

Setup Your Label and Print
25
Tear Off Position – When using the Present mode, adjust this setting to
change the output position of the label. This will move the labels out
further from the printer or move them back toward the printer. The
goal is to center the gap between labels over the Label Tear Bar so that
you can easily tear off a run of labels after they have been printed.
Note:
dpi after each offset refers to the increment each value moves the offset. For
example each increment for TOF = 1/300 of an inch.
Calibrate TOF Sensor – Use this calibration if the printer is not
accurately detecting the print starting position for your label stock. To
complete the calibration follow the instructions that appear.