Primera LP130e, Руководство пользователя

Страница: 2 / 50

ii
Notices:
The information in this document is subject to change without notice. NO
WARRANTY OF ANY KIND IS MADE WITH REGARD TO THIS MATERIAL, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. No liability is assumed for errors contained herein or
for incidental or consequential damages in connection with the furnishing, performance, or use
of this material. This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied, reproduced, or translated
into another language without prior written consent.
Trademark Acknowledgments:
Primera is trademark of Primera Technology Inc. Windows
is a registered trademark of Microsoft Corporation. All other trademarks are the property of
their respective owners.
Safety Standard:
The LP130e complies with the following safety standard: International
Standard IEC 60825-1, Second Edition, 2007/03
Printing History:
Edition 2.0, #511351, Copyright 2013, All rights reserved.
FCC Compliance Statement:
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
For Users in the United States:
This product is intended to be supplied by a UL listed Direct
Plug-In Power Supply marked "Class 2"or a UL listed ITE Power Supply marked "LPS" with
output rated 12VCD, 5.0 amps or higher. This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. In a domestic
environment this product may cause radio interference, in which case the user may be required
to take adequate measures. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cables is required to comply with the Class A limits of Part 15 of the FCC Rules.
You are cautioned that any changes or modifications not expressly approved in this manual
could void your authority to operate and/or obtain warranty service for this equipment.
For Users in Canada:
This digital apparatus does not exceed the Class A limits for radio noise
for digital apparatus set out on the Radio Interference Regulations of the Canadian Department
of Communications. Le present appareil numerique n'emet pas de bruits
radioelectriquesdepassant les limites applicables aux appareils numeriques de la class A
prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des
Communications du Canada.