Primera LP130e, Руководство пользователя

Страница: 30 / 50

26
Setup Your Label and Print
Media Settings Tab
You can adjust Output Mode settings and media overrides. All media
comes with an internal memory chip which stores the correct settings
for that media. The printer uses those settings to print to the media.
However, using the media overrides, you can change the settings.
Output Mode – Using this setting you can adjust how the printed label
will be presented.
• Set to "Present Each Label" if you will only be printing one label at a
time and then tearing off that label. You must press the Pause
button to eject the printed label.
• Set to "Present After No Activity" if you will be printing more than
one label. When this option is selected you will have the ability to
set the present delay in .1 second intervals.
• Set to "Do Not Present" if you will be rewinding labels onto a core
using another device.
Media Overrides – Media chip values are the settings stored on the
media chip inside the label core. Override values can be set to override
Default values. Once you change a setting a "Save Changes" button will
appear. Click it to confirm you changes.
• Sensor Type should not be adjusted unless the stock has been
modified after purchase.
• Max Laser Power. Keep at 100% for smokeless stock. For smoke
stock reduce this percentage to achieve a lighter print.
• 2-Pass. Enable to achieve a brighter printing on smoke stock.
• Laser On Time. Reduce this value to achieve better print quality on
smokeless stock.
• Max Laser Power, Laser On Time and 2-Pass can all be adjusted to
improve print quality.
• Print Speed can be decreased to improve quality and/or decrease
the noise level of the printer.
• Use Vacuum can be used to switch on the filtration unit if label
media default is set to off. You cannot uncheck the Use Vacuum
setting if the label stock default requires the use of the filtration
unit.