
MG14 operating manual Rev 1.4
28
4.2.1.3
Trigger’s Menu -
Triggers Logic
Triggers relays can be active bellow setting value or above. You can define this in the following
submenu:
Fig.4-7 Triggers logic setting
Using the narrow buttons
▲or▼ and MENU/ENTER button you can change triggers logic. E.g. in
Fig.4-7 trigger T1 is active below set value (ref. Fig.4-6), and T2 is active above set value.
4.2.1.4
Trigger’s Menu -
Triggers Active
All triggers can be activated or deactivated. When the setpoint is active works exactly according to
the setpoint values and logic. Inactivation means completely switched off.
Fig.4-8 Triggers logic setting
Using the narrow buttons
▲or▼ and MENU/ENTER button you can change triggers activation. E.g.
in Fig.4-8 trigger T1 is active, and T2 is inactive.
4.2.2.1 Display mode menu
During the normal operation there are to possibilities
of measurement presentation: ‘dual’ or ‘gross’
mode.
Fig.4-9 Display Mode Menu
Using the narrow buttons
▲or▼ and MENU/ENTER button you can move between option and
confirm current action.