
MG14 operating manual Rev 1.4
19
An 8-pin J-45 female appliance socket is available for each sensor. See Fig. 3-4, item D
Pin assignment
Fig. 3-7 Channel 2 appliance socket (RJ45 )
1
+24VDC supply
2
Supply GND
3
Analog Input
4
n.c.
5
Analog GND
6
ITR emission OK
7
ITR Degas
8
ITR emission ON/OFF
n.c. - not connected
CAUTION
!
Improper transmitter.
Transmitters which are not designed for use with the MG14 may damage the device.
Operate the MG14 with proper transmitters only. See Chapter 2.3.1 Sensor
Connections.
CAUTION
!
Multiple connection.
Only one transmitter may be connected to each of the channels. Otherwise the
connected transmitters will be damaged.
Never connect more than one transmitter per channel.
3.3.6 RELAYS