
MG14 operating manual Rev 1.4
27
Fig.4-4 Triggers menu
Using the narrow buttons
▲or▼ you can role the menu from T1 to T4. This menu presents also
actual relation between channels and triggers e.g. Fig.4-4 means that trigger T1 is activate between
2….6 e-6 and is related to channel. Refer also to graph presentation on Fig. 4-3.
Pressing MENU/ENTER button on active position ( left narrow ) you get into the next submenu,
when you define which channel actual trigger should be related to:
Fig.4-5 Triggers channel sets
To change channel use narrow buttons
▲or▼, accept the choice pressing MENU/ENTER button.
Then you get into the next submenu when you can define setpoint value
( ‘Triggers Sets’ value on
Fig.4-3 ):
Fig.4-6 Triggers Setpoint HIGH menu
Using the narrow buttons
▲or▼, you can change the value which is currently display by blinking
cursor. To change position press MENU/ENTER button.