
MG14 operating manual Rev 1.4
20
The switching functions and the error monitoring system influence the states of several relays inside
of the MG14. The RELAY connection (Fig. 3-4, item E) allows to utilize the relay contacts for
switching purposes. The relay contacts are potential-free (floating).
Fig. 3-8 RELAY appliance socket (D-Sub, 9-pin)
1 Trigger 1 common (COM)
2 Trigger 1 (NC)
3 Trigger 1 (NO)
4 Trigger 2 common (COM)
5 Trigger 2 (NO)
6 Trigger 3 common (COM)
7 Trigger 3 (NO)
8 Trigger 4 common (COM)
9 Trigger 4 (NO)
COM common
NC normally closed
NO normally open
3.3.8 Anybus module
User has possibilities to o
perate the unit via one of the “Anybus” module – for exact type please refer
to the chapter: 2.4.2. For exact module description and the pin assignment please refer to the extra
datasheet which is delivered together with the unit
3.3.9 I/O interface
The I/O connections contains the following signal pins:
•
Digital outputs,
•
Analogue outputs