UNI-PDS/UNI-EPDS
Installation Instructions
Visit the Premier Mounts website at http://www.mounts.com
Page 9
Security
Wrench
n
s
If needed, determine the Throw Distance
again.
n
t
Once the correct throw distance has been
determined, use the security wrench (supplied) to tighten the
mounting screws.
Do NOT overtighten these screws.
If the adjustable mounting bracket needs
to be adjusted, the four (4) M6 x 12mm
security screws may be loosened so that
the bracket can be moved ±2˝. Once the
desired height has been achieved,
re-tighten the hardware.
n
n
Insert the inner slide plate into the
projector arm.
n
o
Determine which adjustment slot best
matches your throw distance
calculation (above).
n
p
Raise the adjustable mounting bracket
into position.
n
q
Align the mounting holes of the upper
mounting plate with the mounting holes
of the inner slide plate.
Two (2 - one per screw)
⅛
˝ nylon
washers must be placed between the
adjustable mounting bracket and the
projector arm (see inset to the right).
n
r
Secure and finger-tighten two (2)
M6 x 16mm security head screws.
Projector Arm
Inner Slide
Plate
Adjustable
Mounting
Bracket
M6 x 16mm
Security
Screw
Adjustment
Slot
Calculated
Throw
Distance
⅛˝ Nylon
Washer
Adjustable Mounting Bracket Installation
Upper Mounting
Plate
If using the optional extension arm,
proceed to Page 10.
Proceed to the
“Attaching the Base Box to the
Adjustable Mounting Bracket”
section.
