UNI-PDS/UNI-EPDS
Installation Instructions
Visit the Premier Mounts website at http://www.mounts.com
Page 15
Attaching the Universal Projector Plate (cont’d)
Step 7
n
n
Attach the
Universal Projector Plate to each of the mounting legs by inserting
and tightening one (1) M6 x 12mm screw through the Universal Projector
Plate into the M6 square nut on each of the mounting legs.
n
o
Insert one (1)
Barrel Cap into the end of each leveling barrel.
Single Mount Point Installation
A single ¼-20 x
5
/
16
″
screw must be used to attach the Universal Projector Plate
to the projector if your projector has only one mounting point.
Do not overtighten the mounting screws.
You can use either the standard Phillips head or
Lock-It™ security hardware.
Proceed to the
“Attaching the Projector”
section.
Step 6
Tighten the mounting screws to the projector.
Do not overtighten the mounting screws.
Proceed to the
“Single Mount Point Installation”
section.
Do not overtighten the mounting screws.
You can use either the standard Phillips head or
Lock-It™
security hardware.
