UNI-PDS/UNI-EPDS
Installation Instructions
Visit the Premier Mounts website at http://www.mounts.com
Page 17
The M6 set screw will be used in conjunction with
any standard threaded adapter (sold separately).
n
n
Thread in threaded adapter until
securely fastened.
n
o
Thread in one (1) M6 x 6mm set screw.
n
p
Use an M3 security wrench to tighten the
M6 set screw (included in the PDS-PLUS
hardware).
Upper Mounting
Bracket
M6 Set Screw
M3 Security
Wrench
Set Screw Installation
The security set screw will prevent the unit
from being removed and from being knocked
out of adjustment.
The storage feature may be used to store electronic
components. There is an accessible door on each side of the
storage enclosure. It may be securely held shut with the use of
four (4) M5 x 8mm security head screws. It may be easiest to
pre-wire all cables down the arm (or extension) at this time.
Electronic
Components
Door
Security
Wrench
M5 x 8mm
Security Screw
n
n
Open the storage door that is located on the
side of the wall plate.
n
o
Place the electronic components inside the
storage enclosure.
n
p
Make all electronic connections at this time.
n
q
Close the storage door and secure using two
(2; 1 upper and 1 lower) M5 x 8mm security
head screws. Tighten using a security wrench.
Repeat this process for the other side as well.
Utilizing the Storage Feature
Proceed to the
“Utilizing the Storage Feature”
section.
Proceed to the
“Cable Management”
section.
