UNI-PDS/UNI-EPDS
Installation Instructions
Visit the Premier Mounts website at http://www.mounts.com
Page 7
n
n
Locate the mounting hook cutout on the top of the wall plate.
n
o
Tilt the arm slightly and gently insert the mounting hooks into the mounting
hook cutouts.
n
p
Slowly lower and let the projector arm rest against the wall plate.
Mounting Hook Cutout
Mounting Hooks
Wall Plate
Projector Arm
MAKE SURE THE PROJECTOR ARM IS FULLY
SEATED BEFORE RELEASING THE UNIT.
Attaching the Projector Arm
If using the storage feature of the product, it
may be easier to route any wiring at this time
(please see Page 12).
After the pilot holes have been drilled, use four (4)
5
16
˝ x 3˝ lag bolts and four (4) square washers to
mount the wall plate to the wooden studs.
Use a ½˝ socket and socket wrench to finish this step.
Socket
Lag Bolt and Square Washer
Wall
Plate
Proceed to the
“Attaching the Projector Arm”
section.
Back Plate Covers
Step 6
Step 5
Insert and gently tap the upper and lower back plate covers into place.
Step 1
