UNI-PDS/UNI-EPDS
Page 6
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
THE EXACT CENTER OF THE STUD MUST BE LOCATED FOR CORRECT AND SAFE INSTALLATION.
Use an electronic stud finder (not supplied) to
locate the center of the stud that is in the wall.
Wood Stud
Stud finder
Height
Mark
(from page 5)
Wood Stud
Marking
Wall
Plate
Do NOT over-tighten lag bolts when attaching the mount to the wall. Improper installation may result in personal
injury or damage to property.
Once the mounting points have been marked, use a
¼˝ drill bit and portable drill to drill the pilot holes.
Drill
Marking
Wood Stud Installation
Mounting Point
Mark
Step 1
Step 2
Step 4
Use a pencil to mark the first mounting point, just
above your height mark (from page 5).
Step 3
n
n
Use the level to make sure the wall plate is level from side to side.
n
o
Place the wall plate over the first mounting point mark and use a pencil to
mark the rest of the mounting points.
Four (4) mounting points must be used. Two (2)
upper mounting points and two (2) lower mounting
points.
