EFX 885, 835, 825
Service Manual 20039-166
Page 142
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Replacing the Lower Rear Lift Cover Section
10.
Remove the upper and front cover sections as described above.
11.
Remove the hitch pin from the clevis at the lower mount of the incline motor. Remove the clevis pin from
the lower incline motor mount. Lift the incline motor out of its mounting position and set it on the floor in
front of the EFX. Refer to Diagram 10.2.2.
12.
Remove the two screws that fasten the battery bracket to the rear cover section and remove the battery
bracket.
13.
Slide the battery out of the rear cover section and set it on the floor beside the incline motor.
14.
Remove the two screws that fasten the rear cover section to the frame. Remove the rear cover section from
the EFX.
15.
Set the replacement rear cover section in its mounting position and fasten it with the screws removed in
step 10.
16.
Set the battery in its mounting position. Set the battery bracket in its mounting position and fasten it with
the screws removed in step 8.
Diagram 10.2.2 - Rear Cover Section
17.
Fasten the clevis pin with the hitch pin.
18.
Replace the front and upper cover sections as described above.
Rear Cover
Section
Incline
Motor
Mounting
Screws
Battery
Содержание EFX 825
Страница 15: ......
