Power One AURORA PVI-3.0-OUTD-S-US, Инструкция по установке и эксплуатации

Страница: 62 / 108

Installation and Operator’s Manual Page 62 of 108
(PVI-3.0/3.6/4.2-OUTD-x-US Rev: 2.1)
5.5 LCD Display
5.5.1 Connection of the system to the grid
The two-line Liquid Crystal Display is located on the front panel and shows:
9 Inverter operating status and statistics;
9 Service messages for the operator;
9 Error messages and fault indications.
During regular operation, the display will cycle through available data. The display
changes to a different screen every 5 seconds, or screens may be scrolled manually by
pressing the UP (2nd key from display) and DOWN keys (3rd key from display).
1) These two screens are displayed upon inverter start-up:
2) The following screens may appear while waiting for the connection to be
established:
-
While the system checks for grid connection to be established (“Missing Grid”), the
yellow LED next to the display turns on steady, while the green LED is flashing.
-
When waiting for sun radiation (“Waiting Sun”), the green LED turns on steady.
- When the “Missing Grid” and “Waiting Sun” conditions are verified, the inverter is
connected.
3) Time (seconds) to complete output voltage and frequency check.
4) Shows instant output voltage value and within/outside range status.
Vgrid 197.8 V
In range
POWER-ONE
Initializing…
Please wait
Missing Grid Waiting Sun
Next connections:
2 secs