Power One AURORA PVI-3.0-OUTD-S-US, Инструкция по установке и эксплуатации

Страница: 72 / 108

Installation and Operator’s Manual Page 72 of 108
(PVI-3.0/3.6/4.2-OUTD-x-US Rev: 2.1)
5.5.7 Settings
Select "Settings" from the Main menu (section 5.5.4) to display the first screen that
refers to the password:
Default password is 0000. It can be changed using the keys on display:
¾ Use ENTER to move from one figure to the next (from left to right)
¾ Use ESC to go back to the previous figure (from right to left)
¾
Press ESC repeatedly to go back to the previous menus as described in
section 5.5.3
¾ Press DOWN to scroll numbers backwards (from 9 to 0)
¾ Press UP to scroll numbers from 0 to 9
Type in the correct password and press ENTER to access all information of this
section:
The display has 2 lines; use the keys at the side of the display to scroll through items
or open the corresponding submenus as described in section 5.5.4
A FEW
POINTERS ON DISPLAY KEY OPERATION.
An arrow on left side of the display highlights your current selection. When the chosen
item is selected, press ENTER to open its submenu.
Address
Display Set
Service
New Password
Cash
Time
Language
Vstart
Autotest
Alarm
Remote Control
UV Prot.time
MPPT scan EN/DIS
Scan Period
Password
****