Power One AURORA PVI-3.0-OUTD-S-US Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 108

background image

Installation and Operator’s Manual

Page 18 of 108

(PVI-3.0/3.6/4.2-OUTD-x-US Rev: 2.1)

3

INSTALLATION

WARNING

: The electrical installation of the Aurora inverter must be

performed in accordance with the electrical standards prescribed by the local
regulations and by the National Electric Code (ANSI/NFPA 70 standard).

WARNING

: The connection of an Aurora inverter to the electrical

distribution grid must be performed only after receiving authorization from
the utility that operates the grid.

3.1

Package Inspection

NOTE:

The distributor delivered your Aurora inverter to the carrier safely

packaged and in perfect condition. Upon acceptance of the package, the

carrier assumes responsibility for its safe delivery. In spite of careful
handling, transportation damage to the package or its contents is always a
possibility.

The customer is encouraged to perform the following checks:

•

Inspect the shipping box for apparent damage, such as holes, cracking, or any

other sign of possible damage to its contents.

•

Describe any damage or shortage on the receiving documents and have the carrier

sign his/her full name.

•

Open the shipping box and inspect the contents for internal damage. While

unpacking, be careful not to discard any equipment, parts, or manuals. If any
damage is detected, call the delivering carrier to determine the appropriate action.
Save all shipping material in the event that the carrier sends an inspector to verify
damage!

•

If the inspection reveals damage to the inverter, contact your supplier, or

authorized distributor. They will determine if the equipment should be returned
for repair. They will also provide instructions on how to get the equipment
repaired.

•

It is the customer's responsibility to file a claim with the carrier. Failure to file a

claim with the carrier may void all warranty service rights for any damage.

•

Save the Aurora inverter's original shipping package in the event that you should

ever need to return the inverter for repair.

«
...
16
17
18
19
20
...
»

Содержание AURORA PVI-3.0-OUTD-S-US













































































































Отзывы:

Нет отзывов

Похожие инструкции для AURORA PVI-3.0-OUTD-S-US

Бренд: V2 Страницы: 48

Бренд: UNICOM Страницы: 1

Бренд: T-TeleSec Страницы: 21

Бренд: Fronius Страницы: 135

Бренд: Maplin Страницы: 3

Бренд: Vitus Audio Страницы: 80

Pure Sine PST-100S-12E

Бренд: Samlexpower Страницы: 48

Бренд: Jasco Страницы: 7

Бренд: Kora Страницы: 36

Бренд: Kiloview Страницы: 9

Бренд: Growatt Страницы: 18

Бренд: Audio Note Страницы: 79

Бренд: Wachendorff Страницы: 69

Бренд: Kaysun Страницы: 60

Бренд: National Instruments Страницы: 60

Бренд: wattsonic Страницы: 86

SCM9B-A1000 Series

Бренд: Dataforth Страницы: 8

miConverter GX/T

Бренд: Omnitron Systems Technology Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды