28
Cleaning Removable Parts
All PortionPro Rx parts that come in contact with
pet food detach easily for cleaning. These should be
washed before first use.
Note:
Hand-wash with mild dish soap and warm
water less than 165°F.
Dry all parts completely after cleaning and before
assembling and filling your PortionPro Rx.
To remove the food bowl for cleaning:
Manually open the food bowl door by holding both
and at the same time for 2 seconds. Lift the
food bowl out of the food bowl receptacle using
the grip tab.
TIP:
Put the PortionPro Rx in STOP mode after you
remove the food bowl and before you begin
cleaning. For STOP mode, follow steps on page 16.
To remove the food bin for cleaning:
●
Squeeze finger grips and lift up on
the food bin lid to remove it.
7 Care and Cleaning
1
2
Grasp the grip
tab here and
lift up on the
food bowl to
remove it.
Food clean-out
cavity is located
here, under the
food bowl.
●
Pour any food left in the bin into a container.
●
Grasp the food bin at the corners that adjoin
the control panel and gently pull up and away
to separate the bin from the feeder base.
To remove the food belt system for cleaning:
Press and hold button
1
while lifting handle
2
. Gently
but firmly pull the food belt system from the feeder
base.