29
After you have removed the food belt system from
the feeder base:
●
Hold the food belt system in one hand and grasp
the bottom of the triangle-shaped end
3
in
the other hand. Gently pull the sliding
bottom panel down and out.
●
Thoroughly wash and dry the food belt system.
●
Replace the bottom panel on the food belt
system by lining up the bottom panel with
the tracks on the belt cartridge and sliding
it back in until it clicks.
Make sure that all
tracks are properly aligned
before replacing
the food belt system in the feeder base.
Cleaning the PortionPro Rx Base
Food Clean-out Cavity
●
Push excess kibble bits from the food bowl
receptacle and food gate area through the food
clean-out cavity.
●
If needed, use an old toothbrush for removing
stubborn food residue and cleaning hard-to-
reach areas, such as the bowl door track.
●
Wipe away any residue with a clean, damp
sponge or cloth.
To clean exterior surfaces of the PortionPro Rx,
wipe with a clean, damp sponge or cloth.
Dry all PortionPro Rx components thoroughly
before use.
WARNING:
DO NOT submerge or
immerse the feeder base or control
panel area in water at any time as this
may damage electrical components.
3
3