8
●
Thread the cord through
the opening near the
cord wrap spools.
●
Plug the PortionPro Rx
into a nearby standard
electrical outlet.
You are now ready to program
your new PortionPro Rx!
Programming Your
PortionPro Rx
Keep in mind that you are
programming the PortionPro Rx
to feed one pet in your
household. You will need to
repeat the following steps for
each additional PortionPro Rx
you would like to set up.
If you will be using multiple
PortionPro Rx feeders, set up
one feeder at a time. Attempting
to program more than one
PortionPro Rx simultaneously
will interfere with the pairing of
the assigned collar tags.
Plug In Your PortionPro Rx
●
Insert the power input pin
on the power supply into the
power input socket on the
bottom of the feeder base.
●
If necessary, wrap extra
cord around the cord wrap
spools on the bottom
of the feeder base.
Your PortionPro Rx will
automatically enter programming
mode when the power supply is
initially plugged into a standard
electrical outlet. The LCD screen
will appear as shown here until
you program the device.
●
To program your feeder, follow
the step-by-step guide below.
●
As you complete each
step, the PortionPro Rx
will automatically move
you to the next step.
●
Follow the “Next Select”
prompts at the top left side
of the LCD screen as you
move through the steps.
●
Refer to the Control Button
Guide on the next page to
learn how the buttons function.
Start With:
Assembled PortionPro Rx
Any additional PortionPro Rx feeder
Collar tag(s)
Power supply
Outlet
At least 6 feet
Within
6 feet
At least
3 feet
Programming Mode
