14
To dispense 1 meal
To open OR close
food bowl door
Manual Operation
Note: These functions require
all collar tags (and pets wearing
them) to be at least 3 feet away
from the PortionPro Rx. You will
know that all tags are out of
range if the control panel
buttons are blue.
To Manually Open or Close the
Bowl Door
(Closed mode only)
To open OR close the bowl door,
hold both and at the same
time for 2 seconds.
To Manually Dispense a Meal
To dispense 1 meal, hold
both and at the same time
for about 2 seconds until food
begins dispensing.
Important Functions
Computer Reset
To reset the
computer chip in your
PortionPro Rx, simply unplug
your feeder from the wall outlet,
wait a few seconds, and then plug
it back into the wall outlet. The
PortionPro Rx computer chip will
reset, yet it will retain all of your
existing programmed settings.
Factory Reset
This function
allows you to erase all current
settings programmed into your
PortionPro Rx and clear its
memory of any existing assigned
collar tags. This is especially
important to do when replacing
an old tag so the feeder does not
display missing tag alerts. To do
a Factory Reset, first unplug the
feeder. Then, hold while
plugging the PortionPro Rx power
supply back into a wall outlet.
Once the feeder is plugged in
again, release the button. All
current settings will be erased
and can be reprogrammed.
Info Screens
Four information
screens update you on past and
4 Tips and Terms
Plus Additional Programming Options
At least
3 feet
