background image

© 2009

24” Signature Series Operation / Installation Manual

IntrOductIOn

congratulations  on  your  purchase  of  a  Perlick  residential 

refrigeration product. celebrating over 9 years of excellence, 

Perlick  is  the  industry  leader  in  commercial  refrigeration 

systems.  today,  Perlick  has  taken  its  expertise  and  experi-

ence  into  creating  the  highest  quality  and  most  innovative 

residential products on the market. Perlick’s product offering 

gives you the opportunity to enjoy the functionality and user 

friendliness in just about any room of your home, including 

kitchens,  bedrooms,  entertainment  rooms,  basements  and 

even bathrooms. All Perlick products are built with commer-

cial-grade  stainless  steel  —  providing  you  with  the  beauty 

and durability for a lifetime of use.

this Installation and Operation manual will answer your ques-

tions about the features, operation and maintenance of your 

Perlick unit. If you have questions that are not addressed here, 

call 800/558-5592. 

IMPOrtAnt:  Please  read  all  instructions  completely  before 

attempting to install or operate the unit. take note of dAnGEr, 

cAutIOn  and  WArnInG  when  they  appear  in  the  manual. 

this information is important for the safe and efficient instal-

lation, operation and care of your Perlick unit.

dAnGEr indicates a hazard that will result in serious injury or 

death if precautions are not followed.

WArnInG  indicates  a  hazard  may  cause  serious  injury  or 

death if precautions are not followed.

cAutIOn  indicates  a  hazard  where  minor  injury  or  product 

WArrAnty rEGIStrAtIOn

to  request  information  or  service,  the  model  number  and 

serial number must be provided. this information is located 

on the inside ceiling of the unit and on the warranty registra-

tion card included with information packet shipped with the 

unit. 

IMPOrtAnt: read through the included warranty statement 

then  complete  and  mail  the  Warranty  registration  card  as 

soon  as  possible  to  validate  the  registration  date. Warranty 

registration  can  also  be  done  online  at 

www.perlick.com

.  If 

warranty  registration  is  not  completed,  Perlick  will  use  the 

date of sale as the first date of warranty for the unit. Please 

record the purchase date of the unit and the dealer’s name, 

address and telephone number below.

Model number _____________________________________

Serial number _____________________________________

Purchase date _____________________________________

dealer name  _____________________________________

dealer Address _____________________________________

dealer Phone no.____________________________________

retain  this  manual  along  with  the  sales  receipt  for  future 

reference.

tAblE Of cOntEntS

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Warranty registration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Preparing the Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparing Electrical connections. . . . . . . . . . . . . . . . . . . . . . . . . . 4
unpacking and Moving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Anti-tip brackets  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Shelving  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
door Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Wood Overlay Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Wooden Wine rack trim finishing  . . . . . . . . . . . . . . . . . . . . . . . . 9

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
  General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
  Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
  loading Product  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
  temperature control Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
  Adjusting the Setpoint  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
  checking Product temperature . . . . . . . . . . . . . . . . . . . . . . . . . 0
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
  cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
  cleaning the condenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Summary of Contents for 48" Signature Series

















Reviews: