Porsche 928 S 1984, Руководство пользователя

Страница: 89 / 109

Front turn signal lights (A)
Front parking lights (B)
1. Remove screws from plastic trim, take off
trim.
2. Remove screws holding the lens, and re­
move lens.
3. Remove bulb from bulbholder, and fit new
bulb.
4. Reinstall lens, tighten screws. Check func­
tioning of light.
5. Install plastic trim and tighten retaining
screws.
Fog lights
1. Remove screws from plastic trim, take off
trim.
2. Remove Phillips screws. Take off lamp.
3. Disconnect wire. Push down holding clamp
for bulb.
4. Remove defective bulb and replace. Be
sure guide pins on bulb base fit into socket
of reflector.
5. Reinstall lamp, Tighten screws. Check
functioning and adjustment of light.
6. Install plastic trim and tighten retaining
screws.
Tail lights
The tail lights are housed in one unit.
A - turn signal light C - stop light
Β-tail light D-back-up light
1. Remove Phillips screws and lamp lens.
2. Replace bulb.
3. Reinstall lamp lens and tighten Phillips
screws evenly, alternating from one to the
other.
4. Check light.
87