Porsche 928 S 1984, Руководство пользователя

Страница: 63 / 109

Interior
Plastic, vinyl and leatherette
Corrosion protection
Glass
Use the same cleaning agents as for exterior
and polish dry.
Fabric
Use a vacuum cleaner or a soft bristle brush
to remove dust and loose dirt from carpeting,
upholstery, headliner and other trim. Dirt stains
can usually be removed with a lukewarm soap
water or all purpose cleaner solution, or a dry
foam cleaner. For greasy, oily and other stub-
born stains, use a spot remover. Do not pour
the liquid on the fabric. Dampen a clean cloth
and rub carefully, starting at the edge and
working inward.
Seat belts
Keep belts clean. Very dirty belts may not
retract properly. Do not remove belts from the
vehicle to be cleaned. Do not use chemical
cleaning agents, bleach or dyes. They contain
corrosive properties which will weaken the
webbing. Do not allow inertia reel safety belts
to retract before they are completely dry.
For cleaning, use a mild soap water solution.
Let belts dry out thoroughly and away from
direct sun light.
Use a clean, damp cloth or sponge to keep
this trim free from dust. For other soilage, use
a lukewarm all purpose cleaning solution or a
mild saddle soap for vinyl and leather trim.
Remove water spots and soap traces with a
clean, damp cloth or sponge. Use a clean, soft
cloth to rub dry.
Grease, tar or oil stains can be removed with
a clean cloth or sponge soaked with all pur-
pose cleaner or with a solvent type vinyl or
leather cleaning agent.
Occasionally apply a colorless vinyl or leather
preservative to retain the material's luster and
pliability.
Leather and leather trim
To keep leather seats and trim beautiful and
soft, they should be cleaned and cared for
regularly. Clean leather with a soft, white
woolen cloth and a mild soap water solution.
Do not use chemical or abrasive cleaning
agents. Do not let moisture seep through per-
forated surfaces to safeguard against corro-
sion and cracking from underneath. After
cleaning, apply the leather preservative "Kar-
neol" - Porsche part-No. 000.043.007.00 -
to all dry surfaces with a clean and soft woolen
cloth. Let your Porsche dealer advise you on
the use of the leather preservation product.
The engine compartment, as well as all engine,
transmission, front and rear axle assembly
surfaces at the factory have been treated with
wax based coating for protection against cor-
rosion.
WARNING
Do not apply additional undercoating or
rustproofing on or near the exhaust mani-
fold, exhaust pipes, catalytic converter or
heat shields. During driving, the substance
used for undercoating could overheat and
cause a fire.
Engine Compartment
If it becomes necessary to steam clean or
otherwise wash the engine compartment, the
wax based protective coating is usually lost.
It is, therefore, important to reapply this pro-
tective coating to all engine compartment pa-
nels, flanges, cavities, seams and engine as-
sembly surfaces.
The accelerator cable return spring must be
lubricated after each engine compartment
cleaning.
60