Porsche 928 S 1984, Руководство пользователя

Страница: 88 / 109

Replacing Bulbs
To avoid short circuits, turn off the respective
electrical components when changing light
bulbs.
Keep bulbs free of grease and dirt. Hold
them only with a clean cloth or soft paper.
Do not use chemical cleaning agents for
the plastic lenses. Plastic lenses should
only be cleaned with water or a mild soap/
water solution.
We recommend you keep an assortment of
spare bulbs in the car.
When traveling abroad, remember that some
countries require spare bulbs as part of the
safety equipment.
Sealed Beam Headlights
Replacing light unit
1. Turn the ignition on.
2. Turn light switch to position 2 to raise the
headlights.
3. Turn the ignition off.
4. Unscrew the 3 Phillips screws (arrows) and
remove headlight cover and trim ring.
5. Unscrew the 3 small Phillips screws from
sealed beam securing ring and remove ring.
6. Unplug wires, replace sealed beam unit
and reconnect the wires.
7. Reinstall sealed beam securing ring.
8. Check lights.
9. Reinstall trim ring and headlight cover.
86