Porsche 911 GT3 Cup 2018, Техническое руководство

Страница: 377 / 477

Version: 4/20/2018
6
376
Maintenance
911 GT3 Cup (991 II)
MY 2018
7.1.7 Engine tightening torques
Component
Screw
dimension Tightening torque [Nm (ft-
lb)]
Engine
Retaining bracket at central oil supply line M6x16 13 Nm (9.6 ft-lb)
Pulley on crankshaft M8x1.25
20 Nm (14.8 ft-lb) +90°
crossed
Pulley on alternator A/F 55 Nm (40.6 ft-lb)
Oil filter 1"-12 UNF 20 Nm (14.8 ft-lb)
Oil drain plug on oil modul M16x1.5 30 Nm (22.1 ft-lb)
Screw plugs oil modul M20x1,5 50 Nm
Water drain plug on water pipe M14x1.5 35 Nm (26 ft-lb)
Flywheel M10x1 See 1.5.2
Service cover on valve cover M5x20 7 Nm (4.8 ft-lb)
Intake distributor on cylinder head M6x35 13 Nm (9.6 ft-lb)
Holder tank drain on intake distributor M6x12 10 Nm (7.4 ft-lb)
Holder fuel pipe low prs. on intake distributor M8x12 20 Nm (14.8 ft-lb)
Knock sensor M8x35
23 Nm (17 ft-lb) ± 2 Nm
(1.5 ft lb)
Spark plugs (install max. twice) M12x1.25 25 Nm (18.4 ft-lb)
Ignition coil fastening M6x16 10 Nm (7.4 ft-lb)
Starter M10x35 45 Nm (33.2 ft-lb)
Generator M8x90 15 Nm (11.1 ft-lb)
Fuel
High-pressure lines See 1.6.5
High-pressure pumps M6x25
Initial tightening:
6 Nm (4.4 ft-lb)
Final tightening:
13 Nm (9.6 ft-lb)
Fuel rail M6x16 13 Nm (9.6 ft-lb)
Pressure sensor on fuel rail M10x1
32 Nm (24 ft-lb) ± 2Nm (1,8
ft-lb)