Polycom RealPresence Group Series Скачать руководство пользователя страница 160

Страница: 160 / 276

Manage the System Remotely

Polycom, Inc.

160

Click Download next to Current Settings Profile to download the profile file from the system.

Save the file to a location on your computer.

To upload a profile using the web interface:

Reset the Polycom RealPresence Group system to restore default settings.

In your web browser address line, enter the system’s IP address.

Go to Utilities > Services > Profile Center.

Next to Upload Settings Profile, click Browse and browse to the location of the profile

.csv

file on

your computer.

Click Open to upload the

.csv

file to your system.

Send a Message

If you are experiencing difficulties with connectivity or audio, you might want to send a message to the
system that you are managing.

Only the near site can see the message; it is not broadcast to all the sites in the call.

To send a message using the web interface:

Go to Diagnostics > Send a Message.

In the Send a Message page, enter a message (up to 100 characters in length), then click Send.

The message is displayed for 15 seconds on the screen of the system that you are managing.

Configure Servers

Set Up a Directory Server

The global directory provides a list of other systems that are registered with the Global Directory Server and
available for calls. The other systems appear in the directory, allowing users to place calls to other users by
selecting their names.

You can configure the system to use one of the following directory servers in standard operating mode.

Содержание RealPresence Group Series





















































































































































































































































































Результаты поиска

Содержание RealPresence Group Series

Отзывы:

Бренды по названию

Популярные бренды

Polycom RealPresence Group Series, Руководство администратора

Результаты поиска

Содержание RealPresence Group Series

Отзывы:

Бренды по названию

Популярные бренды