manualshive.com logo in svg

Poly P010, Руководство администратора

Поделиться
Скачать
Poly P010 Скачать руководство пользователя страница 2

Contents

Before You Begin................................................................................................5

Audience, Purpose, and Required Skills.............................................................................5
Related Poly and Partner Resources..................................................................................5

Getting Started................................................................................................... 7

Poly Partner Mode Overview.............................................................................................. 7
Product Overview of Poly Video Systems...........................................................................7

Administrator Features and Capabilities.................................................................. 8

Powering the System On and Off........................................................................................9
Navigating the System........................................................................................................ 9

Access the System Web Interface............................................................................9

Setting Up the System..................................................................................... 10

Overview of Poly G7500, Studio X50, and Studio X30 Hardware.....................................10

Poly G7500 System Ports...................................................................................... 10
Poly Studio X50 System Ports................................................................................11
Poly Studio X30 System Ports............................................................................... 12

LED Status Indicators....................................................................................................... 13

LED Status Indicators for the G7500 System.........................................................13
LED Status Indicators for the Studio X50 and Studio X30 Systems...................... 14

Completing Initial System Setup....................................................................................... 15

Complete Setup with the System Web Interface....................................................15
Complete Setup with Provisioning..........................................................................16

Change Conferencing Partner.......................................................................................... 16
Managing Peripheral Devices........................................................................................... 16

Pairing IP Devices on the Link-Local Network....................................................... 16
Pair an IP Device on the Primary Network............................................................. 18
Connect a USB Device...........................................................................................19
IP Microphones...................................................................................................... 19
Poly Microphone IP Adapter...................................................................................21

Configuring General Settings......................................................................... 24

Name the System and Room............................................................................................ 24
Provide Contact Information..............................................................................................24
Set the Date and Time...................................................................................................... 25
Set the System Location................................................................................................... 25
Set the Local Interface Language..................................................................................... 26

1

Содержание P010






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды