Manually Update Software
You can manually update the software of your system and its connected devices.
Procedure
1.
In the system web interface, go to
General Settings
>
Device Management
.
2.
Select
Check for Updates
.
3.
If the system finds updates, select
Update All
.
Your system and its connected devices update.
Automatically Update Software
You can automatically update the software of your system and its connected devices.
Procedure
1.
In the system web interface, go to
General Settings
>
Device Management
.
2.
Select
Enable Automatic Updates
.
Unless you specify a maintenance window, your system tries to update a minute after you enable
this setting. If an update isn’t available at the time, the system tries again every four hours.
3.
Optional: Select
Only Check for Updates During Maintenance Hours
to specify a range of time
to automatically update the software.
4.
Optional: Choose times for
Maintenance Hours Begin
and
Maintenance Hours End
.
The system calculates a random time within the defined maintenance window to check for
updates.
Note:
If these settings are provisioned, the provisioning profile defines the polling interval. The
default interval is one hour.
Update Software with a USB Flash Drive
You can update the software of your system with a USB flash drive.
Note:
Poly recommends formatting your USB flash drive with the FAT32 file system.
Procedure
1.
Get the software package you want to install from
.
2.
Save the package to the root directory of a USB flash drive and unzip the file.
3.
If the system detects the USB flash drive, a prompt displays on the monitor to confirm that you
want to update the software.
4.
Follow the onscreen instructions to complete the update.
Update Poly HDCI Cameras
You can automatically update an HDCI-connected Poly camera, but not in the same way you update the
system and other connected devices (such as IP microphones).
HDCI cameras only apply to the G7500 system.
System Maintenance
77
