Polestar 2 2020, Руководство пользователя

Страница: 498 / 568

Raising the car
The triangles in the plastic cover indicate the locations of the lifting points (marked in red).
When raising the car, it is important that the jack
is fitted in the intended points on the car's
underbody.
Read through the instructions below before you
start. Take out the tools that you will be using
before jacking up the car.
1. Set up the warning triangle and activate the
hazard warning lights if a tyre is being
changed in a location where there is lots of
traffic, for example.
2. Ensure that the parking brake is activated.
3. Chock in front of and behind the wheels that
remain on the ground. Use, for example,
heavy wooden blocks or large stones.
4. Place the jack or the lifting arms in the desig-
nated locations on the car's chassis. The tri-
angle markings in the plastic cover indicate
the locations of the jacking/lifting points.
There are two jacking points on each side of
the car. There is a recess for the jack at each
point.
5. Position the jack on level, firm and non-slip-
pery ground under the jacking point that will
be used.
498 Maintenance and service