Polestar 2 2020, Руководство пользователя

Страница: 404 / 568

2. Confirm the message by pressing the right-
hand steering wheel keypad's O button.
> The light check starts.
3. Get out of the car to check that the lights are
working.
> All the lights on the trailer start flashing,
then the lights come on one at a time.
4. Check visually to make sure that all the lights
available on the trailer are working.
5. After a while, all the lights on the trailer will
flash again.
> The check is complete.
Checking trailer lights
To change the settings for checking trailer
lights:
1. Tap on in the centre display.
2. Press More .
3. Select Exterior lights .
4. Change the preferred settings.
Related information
• Driving with a trailer (p. 401)
Hitch mounted bicycle
rack
Follow the specified recommendations for
using a towbar-mounted bicycle rack.
Carefully follow the instructions supplied with
the bicycle rack.
• The weight of the bicycle rack plus cargo
must not exceed 75 kg (165 pounds).
• The bicycle rack may be used for max. three
bicycles.
The car's driving characteristics are affected
when a bicycle rack is mounted on the towbar,
e.g. because of:
• increased weight
• reduced acceleration
• reduced ground clearance
• altered braking.
Recommendations when loading bicycles onto
the bicycle rack
The greater the distance between the centre of
gravity of the cargo and the towball, the greater
the load on the towbar.
Load according to the following recommenda-
tions:
• Load the heaviest bicycle nearest to the car.
• Keep the load symmetrical and as close as
possible to the centre of the car, e.g. by over-
lapping the bicycles if loading several bicy-
cles.
• Remove loose parts from the bicycle, such as
a basket, battery or child seat, when trans-
porting it. The aim of this is to reduce the load
on the towbar and bicycle rack, and to reduce
air resistance, which affects the range.
• Do not use a protective cover on the bicycles.
This may affect manoeuvring, impede visibil-
404 Starting and driving