Polestar 2 2020, Руководство пользователя

Страница: 135 / 568

If the symbol is shown in the driver
display, together with the message
Active High Beam Temporarily
unavailable , then switching between
main and dipped beam must be performed
manually. The
symbol extinguishes when
these message are shown.
The same applies if this symbol is
shown together with the message
Windscreen sensor blocked See Man-
ual .
Active main beam may be temporarily unavaila-
ble e.g. in situations with dense fog or heavy
rain. When active main beam becomes available
again, or the windscreen sensors are no longer
blocked, the message goes out and the
symbol illuminates.
Related information
• Lighting control (p. 128)
• Using main beam (p. 133)
• Camera unit (p. 341)
• Recommended maintenance for camera unit
(p. 343)
WARNING
Active main beam is an aid for using the
optimum beam pattern when conditions
are favourable.
The driver always bears responsibility for
manually switching between main and
dipped beam when traffic situations or
weather conditions so require.
Using direction
indicators
The car's direction indicators are operated with
the left-hand stalk switch. The direction indica-
tor lamps flash three times or continuously,
depending on how far up or down the stalk
switch is moved.
Direction indicators.
Short flash sequence
Move the stalk switch up or down to the first
position and release. The direction indicator
lamps flash three times. If the function is
deactivated via the centre display, the
lamps will flash once.
Continuous flash sequence
Move the stalk switch up or down to its end
position.
The stalk switch remains in its position and is
moved back manually, or automatically by the
steering wheel movement.
Related information
• Hazard warning flashers (p. 140)
• Adjusting light functions via the centre dis-
play (p. 129)
>>
Lighting 135