Polestar 2 2020, Руководство пользователя

Страница: 372 / 568

Starting the car
To start the car, a key needs to be inside the car.
Make sure the key is inside the car.
1. Put the seatbelt on.
2. Depress the brake pedal.
3. Change gear to D or R .
> The car is now in Drive mode.
4. Release the brake pedal.
> If Creep is On the car will drive slowly in the
selected direction. If Hold (braking when
stationary) is activated, the accelerator
pedal must be depressed for the car to be
able to drive in the selected direction.
If
Creep is Off the car will not drive for-
wards.
Related information
• Gear positions (p. 385)
• Inching (p. 389)
• Usage modes (p. 373)
• Switching off the car (p. 373)
• Adjusting the steering wheel (p. 171)
WARNING
• Before starting:
• Fasten the seatbelt.
• Adjust the seat, steering wheel and
mirrors.
• Make sure that the brake pedal can
be fully depressed.
WARNING
• • Never use more than one mat at a
time in the driver area. Before driv-
ing, remove the original mat in the
driver area if another type of floor
mat shall be used. All types of mat
must be attached securely in the
floor's mounting points. Make sure
that the brake pedal and accelerator
pedal do not become trapped in the
floor mat as this can involve a major
risk to safety.
• Polestar's floor mats are specially
designed for the car. They must be
attached securely in the floor's
mounting points and must not be at
risk of being trapped under the ped-
als.
IMPORTANT
The car cannot be started if the charging
cable is still plugged-in. Pay attention that
the charging cable is unplugged from the
charging input socket before starting the
car.
372 Starting and driving