Polestar 2 2020, Руководство пользователя

Страница: 528 / 568

rid of the last spots after the car has been
washed.
Related information
• Cleaning the exterior (p. 526)
• Polishing and waxing (p. 526)
• Automatic car wash (p. 530)
• High-pressure washing (p. 531)
• Cleaning wiper blades (p. 531)
• Cleaning exterior plastic, rubber and trim
components (p. 532)
• Cleaning wheel rims (p. 533)
• Rustproofing (p. 533)
• Cleaning matte-painted emblems (p. 529)
IMPORTANT
• To maintain the matte surface of the
emblem, see the separate section.
• Dirty headlamps function less well, so
clean them regularly.
Do not use any corrosive cleaning
agents but use water and a non-
scratching sponge instead.
• • Never use polishing agent with
abrasive properties on the panor-
amic roof.
• Never use wax on the rubber mould-
ings around the panoramic roof.
• Remember to remove dirt from the
drain holes in the doors and in the sills
after washing the car.
NOTE
• Outside lighting such as headlamps
and rear lamps may temporarily have
condensation on the inside of the lens.
This is normal, all exterior lighting is
designed to withstand this. Condensa-
tion is normally vented out of the lamp
housing when the lamp has been
switched on for a time.
• Be aware that the keyless locking and
unlocking function may cause the car
to be locked/unlocked when the car is
being washed if the key is within range.
528 Maintenance and service