Polestar 2 2020, Руководство пользователя

Страница: 468 / 568

IMPORTANT
The jack included with the car is only
designed for occasional, short-term use,
such as when changing a wheel after a
puncture. Only the jack belonging to the
specific model is to be used to jack up the
car. If the car is to be jacked up more
often, or for a longer time than is required
just to change a wheel, use of a garage
jack is recommended. In this instance,
follow the instructions for use that come
with the equipment.
Wheel bolts
Wheel bolts are used to attach the wheels to the
hubs.
Only use rims that are tested and approved by
Polestar and which are Polestar genuine acces-
sories.
Check the tightening torque of the wheel bolts
with a torque wrench.
Do not use lubricant on the threads of the wheel
bolts.
Locking wheel bolts
To loosen or tighten the lockable wheel bolts –
turn the wrench in the lock bolt until it fully
engages in the code grooves. Always start with
the lockable wheel bolts if the wheel shall be
removed. When fitting the wheel, finish with the
lock screw.
When the wheel wrench is not in use, it must be
stored in its place in the storage compartment
under the bonnet. It is important to remember
this if the car is due to visit a workshop in order
to have the tool available. If you lose the wrench,
contact Polestar Support.
Related information
• Changing wheels (p. 464)
WARNING
The wheel bolts may need to be re-tight-
ened several days after the change. Tem-
perature differences and vibration may
mean that they are not attached equally
as tightly.
468 Wheels and tyres