Polaris Scrambler 500 4x4 Скачать руководство пользователя

Страница: 125 / 129

122

WARRANTY

LIMITED WARRANTY

Polaris Sales Inc., 2100 Highway 55, Medina, MN 55340, gives a SIX MONTH LIMITED

WARRANTY on all components of the Polaris All Terrain Vehicle (ATV) against defects

in material or workmanship. Polaris also gives a one year limited warranty on the final drive

chain for failure due to defects. This warranty covers the parts and labor charges for repair

or replacement of defective parts which are covered by this warranty. This warranty begins

on the date of purchase. This warranty is transferrable to another consumer during the war-

ranty period through a Polaris dealer.

REGISTRATION

At the time of sale, the Warranty Registration Form must be completed by your dealer and

submitted to Polaris within ten days. Upon receipt of this registration, Polaris will record

the registration for warranty. THE PURCHASER MUST COMPLETE AN ATV SAFETY

TRAINING COURSE PROVIDED BY THE DEALER IN ORDER TO HAVE VALID

WARRANTY ON THE ATV. No verification of registration will be sent to the purchaser

as the copy of the Warranty Registration Form will be the warranty entitlement. If you have

not signed the original registration and received the “customer copy”, please contact your

dealer immediately. NO WARRANTY COVERAGE WILL BE ALLOWED UNLESS

YOUR ATV IS REGISTERED WITH POLARIS.
Initial dealer preparation and set-up of your ATV is very important in ensuring trouble-free

operation. Purchasing a machine in the crate or without proper dealer set-up will void your

warranty coverage.

WARRANTY COVERAGE AND EXCLUSIONS:

LIMITATIONS OF WARRANTIES AND REMEDIES

The Polaris limited warranty excludes any failures that are not caused by a defect in material

or workmanship. This warranty does not cover accidental damage, normal wear and tear,

abuse or improper handling. This warranty also does not cover any ATV that has been al-

tered structurally, modified, neglected, improperly maintained, used for racing, or used for

purposes other than for which it was manufactured, or for any damages which occur during

trailer transit or as a result of unauthorized service or the use of unauthorized parts. In addi-

tion, this warranty does not cover physical damage to paint or finish, stress cracks, tearing

or puncturing of upholstery material, corrosion, or defects in parts, components or the ATV

due to fire, explosions or any other cause beyond Polaris’ control.
This warranty does not cover the use of unauthorized lubricants, chemicals, or fuels that are

not compatible with the ATV. The exclusive remedy for breach of this warranty shall be, at

Polaris’ exclusive option, repair or replacement of any defective materials, or components

or products. THE REMEDIES SET FORTH IN THIS WARRANTY ARE THE ONLY

REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WARRANTY.

POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER

ARISING OUT OF EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CON-

TRACT, NEGLIGENCE, OR OTHER TORT OR OTHERWISE. Some states do not per-

mit the exclusion or limitation of incidental or consequential damages or implied warranties,

so the above limitations or exclusions may not apply to you if inconsistent with controlling

state law.

Содержание Scrambler 500 4x4


































































































































Результаты поиска

Содержание Scrambler 500 4x4

Отзывы:

Похожие инструкции для Scrambler 500 4x4

Бренды по названию

Популярные бренды

Polaris Scrambler 500 4x4, Руководство пользователя

Результаты поиска

Содержание Scrambler 500 4x4

Отзывы:

Похожие инструкции для Scrambler 500 4x4

Бренды по названию

Популярные бренды