PMI Eagle 220, Руководство пользователя

Страница: 40 / 96

PC and Laptop Communications with Eagle™ Recorders
••••
32
To connect to the Eagle using your desktop PC or laptop, you can
use either the supplied USB communications cable or Bluetooth
®
if your desktop or laptop has Bluetooth
®
communications
capability. If you would like to communicate using USB, use the
supplied USB communications cable that was included with your
Eagle to connect the recorder to your computer. Plug the USB
Type A end of the communications cable into your computer’s
USB receptacle. Plug the other end of the cable (a 4-pin female
connector) into the communications port on the Eagle. The unit is
powered through the USB connection. The green LED illuminates
to indicate that it is in communications mode, and ready for
communication.
If your laptop or desktop computer has Bluetooth
®
communications capability, or if you have purchased a Bluetooth
®
USB adapter, you can communicate with the Eagle using
Bluetooth
®
wireless technology. However, the unit must be
powered either by Channel 1 voltage (greater than 80VAC) or by
battery ride-through (in the case of a power outage) in order to
communicate. See the ProVision and WinScan software
documentation on the supplied CD-ROM for more information on
Bluetooth
®
and USB communications.