PMI Eagle 220, Руководство пользователя

Страница: 33 / 96

Connecting the Eagle™
••••
Disconnecting the Recorder
In order to stop recording when disconnecting your Eagle, you
may connect to the recorder and stop its recording using PMI
software such as ProVision, WinScan, pmiScan, or ProVision
Mobile. Also, if the steps listed below are followed when
disconnecting the Eagle, recording will stop automatically.
Figure 9 – Eagle™ Input Diagram
When disconnecting the recorder, remove the inputs in this
sequence (not all inputs may apply, depending on the model of
your Eagle):
1. Current Input (Flex CTs or TLARs)
2. Common
White
3. Channel 4 Yellow
4. Channel 3 Blue
5. Channel 2 Red
6. Channel 1 Black
If the Eagle is not disconnected in this manner and recording has
not been stopped via software, it will continue recording on battery
ride-through, despite the fact that it is no longer connected.
USB Communications Port CT Input
Ch1 Ch2 Ch3 Ch4 Common
25
In order to stop recording when disconnecting your Eagle, you
may connect to the recorder and stop its recording using PMI
, or ProVision
. Also, if the steps listed below are followed when
disconnecting the Eagle, recording will stop automatically.
in this
(not all inputs may apply, depending on the model of
manner and recording has
not been stopped via software, it will continue recording on battery
, despite the fact that it is no longer connected.
CT Input